Buy

Sell1.CTL- 1  and  2  LINE SPECIFICATION

  1. MATERIAL TO CUT: Cold Rolled Coil
  2. U.T.S. : 52KG/CM2 MAX & 28 KG/CM2 MIN
  3. SHEET THICKNESS : 0.2MM TO 2.5MM
  4. STRAIGHTNER THICKNESS: 0.6MM TO 2.5 MM
  5. YIELD STRENGTH: 26 KG/CM2
  6. LEVELLER THICKNESS : 0.4MM TO 1.6MM
  7. YIELD STRENGTH : 26KG/CM2
  8. ENTRY COIL WEIGHT : 20000 KGS
  9. COIL WIDTH : 400 MM TO1250 MM
  10. COIL I.D.: 508 MM
  11. COIL OD : 1800MM DIA
  12. EXIT SHEET STACKER WT.: 3000 KGS
  13. SHEET LENGTH: 300 MM TO 4000 MM
  14. STACK HEIGHT: 400 MM
  15. LINE SPEED: 21 M.P.M. TO 75 M.P.M.
  16. DEPENDS ON LENGTH-500MM TO 4000 MM
  17.  THREAD SPEED/JOG MODE: 10 M.P.M.

MECHANICAL EQUIPMENT.

  1. ENTRY COILCAR
  2. MANDREEL UNWIND UNIT WITH HOLD DOWN ROLL
  3. PINCH ROLL/STRAIGHTNER WITH SIDE GUIDE &PEELER
  4. EDGE TRIMMER/SCRAP BALLER
  5. LOOP PIT/FEED PINCH ROLL WITH ENTRY EQUIPMENT
  6. HIGH SPEED ROTAARY DOWN CUT SHEAR
  7. SHEAR CONVEYIOR/LEVELLER
  8. INSPECTION CONVEYOR
  9. STACKER CONVEYOR
  10. SCRAP STACKER
  11. STACKER-1 WITH OILER
  12. RUN OUT CONVEYOR-1
  13. TILTING CONVEYOR
  14. STACKER-2 WITH OILER
  15. RUN OUT CONVEYOR-2
  16. HYDRAULIC POWER PACKS/PUMPS/MOTORS/PIPING/VALVE STAND
  17. AIR BLOWER SYSTEM FOR STACKER 1&2
  18. ELECTRICAL AC/DC MOTORS/MECH BRAKE CONTROL PANEL & CONTROL DESK
  19.  PNUMATIC/HYDRAULIC CYLINDERS & SOLINIOD VALVES
  20. STACKER POCKET TRANSFER TROLLEY

2.Equipment : CUT-TO-LENGTH 

Input Material : MS Strip
Input Coil Dia : 1500 mm (max)
Shear Motor : 7.5 Kw , 960 rpm
Shear Blade Length : 1350 mm
Straightener Motor : 75 Kw ,1500 rpm
Leveler Motor : 75 Kw ,1500 rpm
Speed : 0 – 80 mpm
Belt Conveyor : 6 Nos
Stacker Length : 4100 mm

3.TECHNICAL SPEC FOR C.R SLITTER – I

Line Specification

Specification : 2.5 mmx1250mm x20,000 kgs
Material : M.S in C. R Condition
U.T.S : 68 kg/cm2 max
Shear strength : 55 kg/m2 max
Thickness : 0.11 mm to 2.5 mm

Entry Coiler
Coil wt : 20,000 kgs
Coil width : 1250 mm
Coil I.D : 508 mm
Coil O.D : 1800 mm

Exit coil
Coil weight : 20,000 kgs
Coil width : 1250 mm
Coil I.D : 508 mm
Coil O.D : 1800 mm
Line Speed : 50 mpm , 100 mpm & 200 mpm
Jog mode : 15 mpm
Threading speed : 15 mpm
Connecting load : 73 kW

Equipment
1) entry coil car
2) mandrel uncoiler with hold down
3) entry pinch roll
4) entry hydraulic down cut shear with scrap bin
5) loop pit
6) rotating cutter
7) dual scrap winder.
8) Trim pad.
9) Mandrel  recoiler with overarms separator.
10) Hydraulic pump/ pipes / power pack.
11) Electrical equipment motor with panel & control desk

4.TECHNICAL SPEC – CR SLITTER – 2

Equipment : COLD ROLLING STRIP SLITTER
Input Material : MS Strip
Entry Coil Weight : 15 MT
Coil Width : 1000 mm
Entry Coil Dia : Φ1500 mm
Speed : 150 mpm
Mandrel Type : Expand/Collapse mandrel
Arbor Dia : Φ150 mm
Arbor Length : 150 mm
Cutter : 150 mm ID x 280 mm OD x 10 mm thk
Metalic Spacer : 150 mm ID x 210 mm
Rubber Spacer : 210 mm ID x 280 mm
Pressure Pad Load : 1- 2.5 Kg

I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Sell

Sell1.CTL- 1  and  2  LINE SPECIFICATION

  1. MATERIAL TO CUT: Cold Rolled Coil
  2. U.T.S. : 52KG/CM2 MAX & 28 KG/CM2 MIN
  3. SHEET THICKNESS : 0.2MM TO 2.5MM
  4. STRAIGHTNER THICKNESS: 0.6MM TO 2.5 MM
  5. YIELD STRENGTH: 26 KG/CM2
  6. LEVELLER THICKNESS : 0.4MM TO 1.6MM
  7. YIELD STRENGTH : 26KG/CM2
  8. ENTRY COIL WEIGHT : 20000 KGS
  9. COIL WIDTH : 400 MM TO1250 MM
  10. COIL I.D.: 508 MM
  11. COIL OD : 1800MM DIA
  12. EXIT SHEET STACKER WT.: 3000 KGS
  13. SHEET LENGTH: 300 MM TO 4000 MM
  14. STACK HEIGHT: 400 MM
  15. LINE SPEED: 21 M.P.M. TO 75 M.P.M.
  16. DEPENDS ON LENGTH-500MM TO 4000 MM
  17.  THREAD SPEED/JOG MODE: 10 M.P.M.

MECHANICAL EQUIPMENT.

  1. ENTRY COILCAR
  2. MANDREEL UNWIND UNIT WITH HOLD DOWN ROLL
  3. PINCH ROLL/STRAIGHTNER WITH SIDE GUIDE &PEELER
  4. EDGE TRIMMER/SCRAP BALLER
  5. LOOP PIT/FEED PINCH ROLL WITH ENTRY EQUIPMENT
  6. HIGH SPEED ROTAARY DOWN CUT SHEAR
  7. SHEAR CONVEYIOR/LEVELLER
  8. INSPECTION CONVEYOR
  9. STACKER CONVEYOR
  10. SCRAP STACKER
  11. STACKER-1 WITH OILER
  12. RUN OUT CONVEYOR-1
  13. TILTING CONVEYOR
  14. STACKER-2 WITH OILER
  15. RUN OUT CONVEYOR-2
  16. HYDRAULIC POWER PACKS/PUMPS/MOTORS/PIPING/VALVE STAND
  17. AIR BLOWER SYSTEM FOR STACKER 1&2
  18. ELECTRICAL AC/DC MOTORS/MECH BRAKE CONTROL PANEL & CONTROL DESK
  19.  PNUMATIC/HYDRAULIC CYLINDERS & SOLINIOD VALVES
  20. STACKER POCKET TRANSFER TROLLEY

2.Equipment : CUT-TO-LENGTH 

Input Material : MS Strip
Input Coil Dia : 1500 mm (max)
Shear Motor : 7.5 Kw , 960 rpm
Shear Blade Length : 1350 mm
Straightener Motor : 75 Kw ,1500 rpm
Leveler Motor : 75 Kw ,1500 rpm
Speed : 0 – 80 mpm
Belt Conveyor : 6 Nos
Stacker Length : 4100 mm

3.TECHNICAL SPEC FOR C.R SLITTER – I

Line Specification

Specification : 2.5 mmx1250mm x20,000 kgs
Material : M.S in C. R Condition
U.T.S : 68 kg/cm2 max
Shear strength : 55 kg/m2 max
Thickness : 0.11 mm to 2.5 mm

Entry Coiler
Coil wt : 20,000 kgs
Coil width : 1250 mm
Coil I.D : 508 mm
Coil O.D : 1800 mm

Exit coil
Coil weight : 20,000 kgs
Coil width : 1250 mm
Coil I.D : 508 mm
Coil O.D : 1800 mm
Line Speed : 50 mpm , 100 mpm & 200 mpm
Jog mode : 15 mpm
Threading speed : 15 mpm
Connecting load : 73 kW

Equipment
1) entry coil car
2) mandrel uncoiler with hold down
3) entry pinch roll
4) entry hydraulic down cut shear with scrap bin
5) loop pit
6) rotating cutter
7) dual scrap winder.
8) Trim pad.
9) Mandrel  recoiler with overarms separator.
10) Hydraulic pump/ pipes / power pack.
11) Electrical equipment motor with panel & control desk

4.TECHNICAL SPEC – CR SLITTER – 2

Equipment : COLD ROLLING STRIP SLITTER
Input Material : MS Strip
Entry Coil Weight : 15 MT
Coil Width : 1000 mm
Entry Coil Dia : Φ1500 mm
Speed : 150 mpm
Mandrel Type : Expand/Collapse mandrel
Arbor Dia : Φ150 mm
Arbor Length : 150 mm
Cutter : 150 mm ID x 280 mm OD x 10 mm thk
Metalic Spacer : 150 mm ID x 210 mm
Rubber Spacer : 210 mm ID x 280 mm
Pressure Pad Load : 1- 2.5 Kg

I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.